Blog

PVDF and FEVE are fluoropolymer topcoats with superior weathering performance; PE is a polyethylene-based coating with significantly lower UV and color-retention performance.FEVE generally delivers the

Degreasing and conversion coating are foundational to coating longevity. Degreasing removes oils, waxes, and fingerprint oils that hinder wetting and cause pinholes, roughness, and delamination.Conversion

Adhesion is evaluated with both non-destructive and destructive methods to ensure coating-substrate bonding under production conditions.The primary in-line tests are the cross-cut/tape adhesion test (ISO

Chalking and fading on color-coated aluminum coils result from UV-initiated degradation of the coating binder and pigment stability, binder migration to the surface, and environmental

The main coating families are PE (polyester), PVDF (polyvinylidene fluoride), and FEVE (fluorinated polyether/urethane). PVDF offers superior weather resistance and color stability for exterior applications;

Yes, when properly specified, color-coated aluminum coil offers robust corrosion resistance thanks to the aluminum substrate, pretreatment, and a protective topcoat. The level of protection

The process starts with unwinding clean aluminum coils, followed by surface preparation (degreasing, washing, and sometimes etching or phosphating). Then a primer may be applied,

Roof gutters are typically made from color-coated aluminum coils or sheets using AA3000/AA5000-series alloys, selected for outdoor weather resistance and formability. PVDF or FEVE coatings

For roofing, typical coil thickness ranges from 0.6 mm to 1.0 mm. A common mid-point is 0.8 mm, balancing weight, strength, and cost. In harsh

PVDF coated aluminum coil is aluminum sheet or strip finished with a PVDF-based coating. It offers exceptional weather resistance, color stability, and long-term gloss retention,

Start with the application, environment, and performance needs. Key specs include coating type (PE, PVDF, FEVE), substrate (AA3000/5000 series), coating thickness, width, and length. Exterior

Color-coated roofing sheets come in a range of widths and thicknesses. Common widths include 600 mm, 700 mm, 900 mm, 1000 mm, 1100 mm, 1200